I made it Myself

I made my own ink storage from foam core board, and white duct tape.

First I made the back and added sides and upright supports to fit my ink pads...

Next I measured the height of the ink pads and cut slots to slide the shelves into, at this point it was only held together with a few pieces of tape

 Here it is finished all uprights and shelves cut and in place, it was a lot of work, cutting and measuring, it is not perfect but for under $10.00 it is perfect!!

Of course after all that and watching Gina's latest video over at www.stamptv.com I had to make a card.

Thanks for stopping by
Susan